Jump to content

Disclaimer



laserman123's Blog



Photo

Quality Monitoring Technology of Laser Welding

Posted by laserman123 , 27 March 2017 · 54 views
laser
Quality Monitoring Technology of Laser Welding [color=rgb(0,0,0)][font=Simsun][size=1]
For [url="http://www.everyonetobuy.com/1mw-red-laser-keychain.html"]1mw laser pointer[/url] welding of diamond saw blade, the need for appearance, microstructure and welding strength and other parameters of the test. The appearance of the main detection of the existence of welding macroscopical defects such as hole cracks, undercuts and not penetration, etc., usually need to be 100% of the detection, significant organizational detection of the main parts of the chemical parts of the inspection, significant changes in the structure and phase structure, The results show that the fine chemical composition of the molten zone has a gradient diffusion, and the transition layer hardness is lower than that of the matrix, which is higher than that of the tip. The welding strength test mainly tests the tensile strength, bending strength, impact toughness and residual stress of the weldment. It is usually necessary to carry out 100% welding strength test, and the residual stress and distribution after welding seriously affect the service life of the diamond saw blade.[/size][/font][/color][color=rgb(0,0,0)][font=Simsun][size=1]
[url="http://www.everyonetobuy.com/"][img]http://www.everyonetobuy.com/images/STARA-24.jpg[/img][/url][/size][/font][/color][color=rgb(0,0,0)][font=Simsun][size=1]
At present, laser welding diamond saw blade process there are still some problems, we need to conduct further research, to carry out special laser welding diamond saw carcass or transition layer material formula research, to carry out new ultra-fine or nano-pre-alloy powder research, The research on the mechanism of laser welding of diamond saw blades, especially the research of temperature field, flow field, mass field and stress field of [url="http://www.everyonetobuy.com/5mw-green-spot-laser-pointer-pen-_-green-laser-pointer-electronic-pen.html"]5mw green laser[/url] welding diamond saw blade and the on-line quality monitoring technology of laser welding diamond saw blade process are carried out. In fact, only a comprehensive understanding of the mechanism of laser welding diamond saw blade, it may be developed accordingly the new online quality monitoring technology; only master the theory of pre-alloy powder, it is possible to develop a new ultra-fine or nano-alloy powder and Better use of new ultra-fine or nano-pre-alloy powder to develop a dedicated diamond saw blade.[/size][/font][/color][color=rgb(0,0,0)][font=Simsun][size=1]
In accordance with the current theory of physics, the fastest speed of non-speed must go. Although the human in many areas to the development of the speed of light level, but has not yet applied to the semiconductor case. This technology requires not only a smaller 3D transistor, but its working principle is not dependent on the power to achieve, but the laser, it relies on ultra-fast laser pulse to move the electron. Scientists use gallium selenide crystals as their semiconductors and impinge on [url="http://www.everyonetobuy.com/red-laser.html"]red laser pointer[/url] pulses at femtosecond speeds, and for "lightwave" electronic devices, the charge carriers move too fast and they no longer collide with each other, not only to increase the speed, And more energy efficient.[/size][/font][/color][color=rgb(0,0,0)][font=Simsun][size=1]
The promotion of the concept of lightweight automotive industry is growing. Lightweight, is to ensure the strength and safety of the premise of the car, as far as possible to reduce the quality of car preparation, reduce fuel consumption, reduce pollution, a concept and method. Due to the increasing importance of fiber lasers in highly automated, highly flexible production systems, the laser solution covers all applications in the automotive industry. We first look at the following in the General Motors as the representative of the US auto industry, aluminum body manufacturing laser welding applications introduced.[/size][/font][/color][color=rgb(0,0,0)][font=Simsun][size=1]
Typically, automotive laser welding is mainly used for suspension structures, such as the door and the back cover and white body welded together. Cadillac CT6 aluminum alloy roof and body connection and the trunk cover assembly connection is the use of laser welding process. The connection between the aluminum plates is achieved by the [url="http://www.everyonetobuy.com/mini-flashlight-green-laser-pointer-50mw.html"]50mw green laser[/url] melting aluminum material. One of the aluminum lid welding of the back cover is not required to be polished and other processing to carry out the subsequent painting operation, which shows the smoothness of the weld surface. And the ceiling and the aluminum alloy weld between the body without grinding, only in the coating before applying a layer of glue and scraping to ensure the quality of follow-up paint finish. In addition, the OEMs have recently begun to use laser welding internal components, such as aluminum alloy filter and steering wheel, as well as electric vehicle battery aluminum alloy shell, copper pole and so on.[/size][/font][/color][color=rgb(0,0,0)][font=Simsun][size=1]
Laser processing equipment demand continues to expand, the advantages of the platform to help Han's laser technology to fully benefit from laser technology has become an important means of advanced manufacturing technology and upgrading of traditional industries. Panel industry competition pattern is undergoing profound changes, the domestic panel manufacturers are playing a decisive role in the entire panel industry, the future of domestic production line panels using domestic[url="http://www.everyonetobuy.com/100mw-powerful-blue-violet-laser-pointer.html"]100mw laser pointer[/url] equipment is the trend. Dazu laser with a full set of panel production line of laser equipment supply capacity, the domestic OLED production line panel production line and its related products is expected to be applied to the LCD laser equipment upgrades and subsequent batches of investment and construction, in order to become an important thrust of future performance of the company.[/size][/font][/color][color=rgb(0,0,0)][font=Simsun][size=1]
[url="http://laserman.wagomu.id/e21597.html"]http://laserman.wagomu.id/e21597.html[/url][/size][/font][/color][color=rgb(0,0,0)][font=Simsun][size=1]
[url="http://saita.net/myblog/detail/26036/216481.html"]http://saita.net/myblog/detail/26036/216481.html[/url][/size][/font][/color][color=rgb(0,0,0)][font=Simsun][size=1]
[url="http://laserman123.nikablog.ir/post-164176.html"]http://laserman123.nikablog.ir/post-164176.html[/url][/size][/font][/color]


Photo

Remote Laser Processing Technology

Posted by laserman123 , 24 February 2017 · 209 views
laser pointer
Remote Laser Processing Technology [color=rgb(0,0,0)][font=Simsun][size=1]
High-power, high-brightness fiber lasers make rapid laser scanning (RLS) applications rapid development. Compared to other technologies, RLS has greater flexibility and faster processing speed, and greatly reduce the large-size workpiece processing cycle. The key to the design of the RLS system is the working distance of the scanning head, the size of the focal spot, and the scanning range. One advantage of using a high-brightness fiber [url="http://www.everyonetobuy.com/20mw-spot-green-laser-pointer-pen.html"]20mw laser pointer[/url] is that it can increase the working distance and scan range while achieving a smaller focal spot size to increase the welding speed and increase the weld penetration.[/size][/font][/color][color=rgb(0,0,0)][font=Simsun][size=1]
[url="http://www.everyonetobuy.com/"][img]http://www.everyonetobuy.com/images/STARA-24.jpg[/img][/url][/size][/font][/color][color=rgb(0,0,0)][font=Simsun][size=1]
Conventional fiber lasers use fiber-coupled technology to couple multiple laser outputs together, resulting in lower brightness of the output laser. The new generation of fiber lasers uses an innovative architecture that combines the pump diodes and drivers into separate pump modules. The gain fiber is mounted in a configurable gain module that can output more than 8kW of laser power. The gain module is based on the novel main oscillator / power amplifier (MOPA) design, enabling high-brightness [url="http://www.everyonetobuy.com/200mw-green-laser-pointer-adjustable-flashlight-burning-match.html"]200mw laser pointer[/url] output. In addition, the Ennie laser also uses a reliable integrated backlash isolator to protect all modules from the impact of backlit light, can be high anti-material for full power, uninterrupted, stable processing. These two technological innovations play a vital role in RLS applications.[/size][/font][/color][color=rgb(0,0,0)][font=Simsun][size=1]
Another application with high-speed scanning of fiber [url="http://www.everyonetobuy.com/100mw-powerful-blue-violet-laser-pointer.html"]100mw laser pointer[/url] with significant advantages is the cutting, 3D shaping and drilling of carbon fiber composite materials (CFRP). Carbon fiber composites, also known as carbon fiber laminates, are widely used in automotive lightweighting and are a new generation of more energy efficient and safe manufacturing materials. Carbon fiber composite material is a high-purity carbon fiber braid and hardened composite materials (such as epoxy resin) bonding, very strong and hard.[/size][/font][/color][color=rgb(0,0,0)][font=Simsun][size=1]
Today, in the field of transport, especially in the aircraft and automotive industries, there are lightweight needs, which reduce energy consumption and CO2 emissions and other sustainable development strategies have far-reaching significance. Large-scale manufacturing markets (such as cars) are increasingly demanding fast and low-cost manufacturing processes, including carbon fiber composite molding, joining and [url="http://www.everyonetobuy.com/mini-flashlight-green-laser-pointer-50mw.html"]50mw laser pointer[/url] cutting processes. The mechanical cutting of long fiber composites will cause the machine tool to be worn and must be replaced by frequent cutting tools to maintain the accuracy of the parts, increasing the processing cycle and manufacturing costs. In addition, machining usually requires water to cool the parts and remove debris and reduce dust. After cutting, in order to reduce the impact of water on the components, often have to dry the parts, extending the entire manufacturing process. Another challenge for water jet cutting is the need for complex water pipelines. Laser technology for the processing of carbon fiber composite material provides no wear, no external and anhydrous processing technology, and fast, high degree of automation, easy to solve the carbon fiber composite mechanical cutting all the shortcomings.[/size][/font][/color][color=rgb(0,0,0)][font=Simsun][size=1]
High-brightness fiber laser processing of high thermal conductivity material, it is best to use a small spot to maintain the stability of the welding hole, but this process may make the process is too intense, resulting in a large number of welding splash. Experiments show that high-brightness [url="http://www.everyonetobuy.com/green-laser-pointer-30mW.html"]30mw laser pointer[/url] with high-speed positioning of the remote scanning head, significantly reduce the welding splash, which is achieved by beam swing to ensure that the welding hole stability to achieve. Welding copper, aluminum, if you do not use the beam swing mode, welding splash will be very serious. Once the high-frequency swing beam is used, the splash will be reduced. In addition, En-resistant laser's original anti-high anti-technology in this application is also indispensable, by installing a protective device to avoid the equipment by the back light damage. Processing of copper and aluminum such high reflective metal, the backlit light is inevitable, the traditional laser due to the natural sensitivity of the return light, may lead to processing instability and destructive automatic shutdown, or even scrapped.[/size][/font][/color][color=rgb(0,0,0)][font=Simsun][size=1]
A new generation of fiber lasers is revolutionizing kilowatt-class materials processing. With its unique architecture, nLIGHT altaTM offers the industry's highest brightness kilowatt-class lasers. This combination of high-speed scanning system performance, can be achieved before the processing speed and application speed. Anti-high anti-technology to achieve high-reflective material full power, uninterrupted welding, while ensuring continuous and stable weld quality. The combination of high-brightness [url="http://www.everyonetobuy.com/10000mw-blue-laser-pointer-light-cigarette-match.html"]burning laser pointer[/url] and scanning systems for the cutting and etching of carbon fiber composites enables high-speed, high-quality machining and minimal thermal impact, and has contributed to the development of advanced new materials processing technologies.[/size][/font][/color][color=rgb(0,0,0)][font=Simsun][size=1]
[url="http://www.minp-matome.jp/pub/2529f449f55e658f568c7fb4e63d1051"]http://www.minp-matome.jp/pub/2529f449f55e658f568c7fb4e63d1051[/url][/size][/font][/color][color=rgb(0,0,0)][font=Simsun][size=1]
[url="http://laserman123.go-jin.com/e66141.html"]http://laserman123.go-jin.com/e66141.html[/url][/size][/font][/color][color=rgb(0,0,0)][font=Simsun][size=1]
[url="http://laserman123.aramblog.ir/post/3"]http://laserman123.aramblog.ir/post/3[/url][/size][/font][/color]





Search My Blog